Сверхпроводники в электроэнергетике | Сверхпроводники в электроэнергетике

НИЦ «КУРЧАТОВСКИЙ ИНСТИТУТ», Курчатовский комплекс НБИКС-технологий, Отделение сверхпроводимости

Авторизация | Карта сайта | Помощь English

Вы запросили Авторы: Huang C.
Показаны 21−40 из 70	< предыдущая 1 2 3 4 следующая >	Показать все

Если количество статей оказалось слишком большим или маленьким попробуйте изменить запрос.

Wang Y., Li L., Zhang K., Zhang C., Xu D., Zhang H., Liu H., Wu Z., Huang R., Huang C.

DC surface flashover characteristics of ZnO/Epoxy composites at room temperature and 77 K

Ключевые слова: insulating medium, nitrogen liquid , breakdown characteristics, surface, dc performance, cryogenic systems, high voltage process, flashover

IOP Conference Series: Materials Science Engineering, 2020, v.756, N 1, p.12004

Полный текст на Sci-Hub

Дополнительная информация

Li C., Xiao X., Huang C., Zheng Z.

Enhancing Transient Voltage Quality in a Distribution Power System With SMES-Based DVR and SFCL

Ключевые слова: power distribution system, SMES, FCL, power equipment, design, modeling, fault currents, numerical analysis, quality control

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.5400405

Полный текст на Sci-Hub

Дополнительная информация

Li C., Yang R., Xiao X., Huang C., Zheng Z.

A Low Voltage Ride Through Scheme for DFIG-Based Wind Farm With SFCL and RSC Control

Ключевые слова: wind farms application, FCL resistive, control systems, power reactive, modeling, fault currents, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.5601005

Полный текст на Sci-Hub

Дополнительная информация

Wang Y., Huang C., Zheng Z., Xiao X.Y.

Cooperative Control of SFCL and SMES for Protecting PMSG-Based WTGs Under Grid Faults

Ключевые слова: power equipment, SMES, FCL resistive, wind farms application, fault currents, control systems, modeling, numerical analysis

IEEE Transactions Applied Superconductivity, 2019, v.29, N 2, p.5601106

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Xu B., Huang C.

Dynamic simulations of actual superconducting maglev systems considering thermal and rotational effects

Ключевые слова: Maglev system, dynamic operation, thermal performance, rotating characteristics, electromagnetic forces, excitation system, modeling, numerical analysis, levitation performance

Superconductor Science Technology, 2019, v.32, N 4, p.45002

Полный текст на Sci-Hub

Дополнительная информация

Li G., Devred A., Clayton N., Evans D., Huang C., Gung C.-Y., Crouchen M., Piccin R.

Manufacture and electrical characterisation of high voltage insulation for superconducting busbars – (Part 2) application techniques and electrical characteristics

Ключевые слова: insulating medium, high voltage process, fabrication, winding techniques, feeder, ITER, bus bar conductor, current leads, joints superconducting , discharge characteristics, photo

Cryogenics, 2019, v.98, N , p.113-124

Полный текст на Sci-Hub

Дополнительная информация

Lee D., Chen J., Liao C., Wu C., Cheng Y., Huang C., Hu K., Hsu K.

An FPGA-Based Quench Detector and Data Acquisition System for Superconducting Insertion Devices

Ключевые слова: quench detection, quench protection, prototype, test results

IEEE Transactions Applied Superconductivity, 2018, v.28, N 3, p.4701005

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Huang C.

Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk

Ключевые слова: bulk, rings, reinforcement, mechanical properties, numerical analysis, magnetostriction, fracture behavior, crack formation, modeling, stress effects, stress distribution, tensile tests, geometry effects

AIP Advances, 2018, v.8, N 3, p.35025

Полный текст на Sci-Hub

Дополнительная информация

Li L., Huang C.

Magnetic confinement fusion: a brief review

Ключевые слова: fusion, Tokamak, magnetic systems, stellarator, LTS, HTS, review, confinement

Frontiers Energy, 2018, v.12, N 2, p.305-313

Полный текст на Sci-Hub

Дополнительная информация

Chen X., Zhao L., Li C., Xiao X., Huang C., Zheng Z.

Performance Evaluation of a MW-Class SMES-BES DVR System for Mitigation of Voltage Quality Disturbances

Ключевые слова: power equipment, SMES, hybrid systems, battery storage, modeling, transient performance, quality control

IEEE Transactions Industry Applications, 2018, v.54, N 4, p.3090-3099

Полный текст на Sci-Hub

Дополнительная информация

Xu J., Xiao X., Chen X.Y., Huang C., Zheng Z.

Performance Evaluation of a MW-Class SMES-Based DVR System for Enhancing Transient Voltage Quality by Using d–q Transform Control

Ключевые слова: power equipment, SMES, modeling, numerical analysis, transient performance, quality control

IEEE Transactions Applied Superconductivity, 2018, v.28, N 4, p.570805

Полный текст на Sci-Hub

Дополнительная информация

Ding L., Xu L., Huang C., Lin R.

Enhancing the LVRT Capability of PMSG-Based Wind Turbines Based on R-SFCL

Ключевые слова: wind farms application, FCL resistive, modeling, magnets permanent, generators, numerical analysis, turbine

IOP Conference Series: Materials Science Engineering, 2018, v.322, N , p.72044

Полный текст на Sci-Hub

Дополнительная информация

Wang L., Song Y., Li L., Wei J., Du S., Huang C., Fang C., Xin J.

Development of welding and processing technologies of helium inlet for ITER Correction Coil

Ключевые слова: ITER, correction coils, cryogenic systems, LTS, NbTi, cable-in-conduit conductor, coils pancake

Fusion Engineering Design, 2018, v.137, N , p.268-273

Полный текст на Sci-Hub

Дополнительная информация

Liu J., Huang C.

Magnetic and mechanical properties of a finite-thickness superconducting strip with a cavity in oblique magnetic fields

Ключевые слова: strips, mechanical properties, crack formation, defects, magnetic field dependence, modeling, numerical analysis, magnetization, torque, stress effects, stress distribution

J Applied Physics, 2017, v.121, N 2, p.23905

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Liu J., Yong H., Huang C.

Simulation of magnetization and levitation properties of arrays of ring-shaped type-II superconductors

Ключевые слова: bulk, rings, magnetization, levitation performance, mechanical properties, magnetic properties, critical state model, uniformity, numerical analysis

Physica C, 2017, v.534, N , p.55-60

Полный текст на Sci-Hub

Дополнительная информация

Li L., Xu D., Zhang H., Han Y., Liu H., Huang R., Huang C.

Liquid helium free mechanical property test system with G-M cryocoolers

Ключевые слова: cryogenic systems, helium liquid, cryocoolers, cooling technology, measurement setup, measurement technique, mechanical properties, cryogenic materials, stainless steel, Cu-based conductors, test results

Cryogenics, 2017, v.85, N , p.58-62

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Yong H., Xue C., Huang C.

Modeling dynamic behavior of superconducting maglev systems under external disturbances

Ключевые слова: Maglev system, modeling, levitation performance, modeling, numerical analysis, dynamic operation

J Applied Physics, 2017, v.122, N 8, p.83904

Полный текст на Sci-Hub

Дополнительная информация

Chen X., Xiao X., Huang C., Zheng Z.

Design and Evaluation of a Mini-Size SMES Magnet for Hybrid Energy Storage Application in a kW-Class Dynamic Voltage Restorer

Ключевые слова: SMES, model small-scale, hybrid systems, design, battery storage, HTS, GdBCO, coated conductors, coils pancake, magnets, fabrication, design parameters, critical caracteristics, current-voltage characteristics, modeling, numerical analysis, transient performance, dynamic operation

IEEE Transactions Applied Superconductivity, 2017, v.27, N 7, p.5700911

Полный текст на Sci-Hub

Дополнительная информация

Zhou Y., Yong H., Huang C.

Influence of movement direction on levitation performance and energy dissipation in a superconducting maglev system

Ключевые слова: Maglev system, levitation performance, dissipative properties, modeling, numerical analysis, power losses

AIP Advances, 2017, v.7, N 11, p.115305

Полный текст на Sci-Hub

Дополнительная информация

Yang Y., Huang X., Wu Z., Huang R., Huang C., Li L.*

Evaluation of the cryogenic mechanical properties of the insulation material for ITER Feeder superconducting joint

Ключевые слова: ITER, feeder, joints superconducting , insulating medium, mechanical properties, cryogenic systems, tensile tests, fatigue behavior, test results

IOP Conference Series: Materials Science Engineering, 2017, v.279, N 1, p.12005

Полный текст на Sci-Hub

Дополнительная информация

© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.

Авторы: Huang C.

DC surface flashover characteristics of ZnO/Epoxy composites at room temperature and 77 K

Enhancing Transient Voltage Quality in a Distribution Power System With SMES-Based DVR and SFCL

A Low Voltage Ride Through Scheme for DFIG-Based Wind Farm With SFCL and RSC Control

Cooperative Control of SFCL and SMES for Protecting PMSG-Based WTGs Under Grid Faults

Dynamic simulations of actual superconducting maglev systems considering thermal and rotational effects

Manufacture and electrical characterisation of high voltage insulation for superconducting busbars – (Part 2) application techniques and electrical characteristics

An FPGA-Based Quench Detector and Data Acquisition System for Superconducting Insertion Devices

Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk

Magnetic confinement fusion: a brief review

Performance Evaluation of a MW-Class SMES-BES DVR System for Mitigation of Voltage Quality Disturbances

Performance Evaluation of a MW-Class SMES-Based DVR System for Enhancing Transient Voltage Quality by Using d–q Transform Control

Enhancing the LVRT Capability of PMSG-Based Wind Turbines Based on R-SFCL

Development of welding and processing technologies of helium inlet for ITER Correction Coil

Magnetic and mechanical properties of a finite-thickness superconducting strip with a cavity in oblique magnetic fields

Simulation of magnetization and levitation properties of arrays of ring-shaped type-II superconductors

Liquid helium free mechanical property test system with G-M cryocoolers

Modeling dynamic behavior of superconducting maglev systems under external disturbances

Design and Evaluation of a Mini-Size SMES Magnet for Hybrid Energy Storage Application in a kW-Class Dynamic Voltage Restorer

Influence of movement direction on levitation performance and energy dissipation in a superconducting maglev system

Evaluation of the cryogenic mechanical properties of the insulation material for ITER Feeder superconducting joint